Speedsty Motorsports PNP Holley Terminator X Harness: Post 03/07 E9x

Not a fan of cutting up your factory wiring? Not a fan of wiring in general? Looking to save time wiring up your swap? This plug and play break out harness will connector to your post 03/07 (Build date Feb 07 and later) e9x n54/n52 chassis and allow you to connect a Holley Terminator X Max harness with almost no work at all. Harness built by Speedsty Motorsports.

Positap connections:
Holley power (12v+)
Holley trans power (12v+)
Holley ignition (12v+ key on)
Holley trans ignition (12v+ key on)
Holley trans brake signal (12v brake signal to ecu)
DBW brake signal
Brake signal (used for auto transmission harness)
Can+
Can- (for lse9x can box connections)
Radiator fan - Cooling Fan PWM - (now controlled by Holley) MUST HOOK TO A HOLLEY OUTPUT WIRE FOR CONTROL VIA TERMINATOR
EBox fan(optional for keeping ecu cooled)

Ring terminals:
Ground
Starter trigger(long 14 awg)

In your dme box, after the engine harness has been removed, you will be left with a long grey rectangular dme connector and 2 other connectors (one on a manual transmission car) with 12 pins, This should fit this late style harness

These are configured for automatic transmission cars, but can be used in a manual transmission car by omitting connectors and running one wire to the CAS if the car is converted to automatic, if it is staying manual no extra wire needs to be run.



Holley Main Power/Battery Connection:

Red - 12 Constant (battery)

Black - Ground (battery)



Holley Main HARNESS:

Red wire - PNP harness connection "Holley Power"

Red/White wire - PNP harness connection "IGN"

Black wire - Chassis ground



Holley Trans HARNESS:

Grey wire - PNP harness connection "Brake"

Black wire - Chassis ground

Red wire - PNP harness connection "Trans Power"

Red/White wire - PNP harness connection "IGN"



Holley DRIVE-BY-WIRE HARNESS:

Red/White(pinkish) wire - PNP harness connection "Brake"



Holley I/O HARNESS

Grey/Black wire - PNP harness connection "Cooling Fan PWM-"

Grey/Green wire - PNP harness connection "EBOX Fan PWM-" (Optional to keep ecu cool)



CANBOX:

Red wire - PNP harness connection "CAN- Red"

Blue wire - PNP harness connection "CAN+ Blue"