How to Configure Holley Terminator X to Control your BMW E9x Fan

Wiring the BMW cooling fan is very simple. Power and ground connections are left totally stock and you only need to connect one wire in the DME box to one...

Accessory Drive Instructions

Please Refer to your spacing - Truck, F-body, Corvette:  Applicable to non AC drive by omitting unused bolt locations.  Alternator must be grounded, if you do not add an external...

Selecting the Correct Part Number for Holley Terminator X Max ECU Installation in BMW e9x/e8x Chassis

Selecting the Correct Part Number for Holley Terminator X Max ECU Installation in BMW e9x/e8x Chassis When integrating the Holley Terminator X Max ECU into a BMW chassis, selecting the...

Swap Basics: Driveshafts

Driveshafts in a swap is a simple but necessary part that can come in MANY different forms. There are various styles of drive shaft joints, sizes, yokes, flanges, adapters. Below...

Swap Basics: Relays

https://www.youtube.com/watch?v=iRa2U2cTj8c A relay is an electrically operated switch. It consists of a set of input terminals for a single or multiple control signals, and a set of operating contact terminals....

Swap Basics: Starter Wiring

https://www.youtube.com/watch?v=kFsl5r34lCI Starter wiring can be confusing to someone who has not wired one before, or doesn't understand how they function. The main wiring of an LS starter only requires 3...

N55 Equipped Cars

Special thank you to Evan Schulte for taking the time to put together the following guide! Overview The biggest difference for N55 is that the DME is located under the...

9-16 of 16 articles